TECHNICAL SPECIFICATIONS

RIG JACKRO 340

1. POWER SUPPLY UNIT

  • Engine Diesel Kubota 4 Cylinder V2203-E2B-EU-X3 Made in Original Japan.
  • Power 40 Hp/ 3000 Rpm
  • Hydraulic Power by Marzocchi
    ALP3AD60 + ALPPD2A16 Double ( for Rotary, and for up/down)
  • Pressure 3000 Psi/210 bar
  • Hydraulic Tank : 80 litre
  • Diesel Fuel tank : 30 litre

2. CONTROL DEVICE UNIT

  • Hand Control Valve 3Bank 1/2”
    Monoblock Branded Integral Italy IHV 20-3D/d5
    ( For Hydraulic Rotation, Hydraulic
    Winch, And Hydraulic Wire line ).
  • Hand Control Valve 3Bank 3/8” Mono
    block Branded Integral Italy IHV 18-3D/d5
    ( For Hydraulic Up Down , Hyd. Sleding
    Gearbox and Hydraulic Clamp Chuck Assembly ).
  • Relief Valve : For Adjustment pressure
    up/down Integral RV2-1/2” –F,
  • Max Pressure 3000 Psi. Regulator Valve
    : For adjustment flow up/down Integral FRV2-1/2”
  • Max flow 150 liter / minute, Brake Valve
    : For adjustment brake winch and wire line.
  • Branded Integral Italy CBV2 1⁄2” 0-3000
    Psi, Pressure Gauge : By. Skon USA 0-250 Psi

3. POWER DEVICE UNIT

Rotary Head Motor Jacro 240 5(RH 1⁄2”) 4000 Series 109-1116 -006 By. Eaton USA

  • Speed Power : 0-1200 Rpm, Power
    Pressure : 0-3000 Psi, Speed Rotary : 700-1500 Rpm

Up/Down Cylinder Hydraulic DFM 240 5CH Dia 63 x 73 x 40 x Stroke 1800mm

  • Torsi Capacity : 915MM (66641 lb/in),
    Speed Power : 1000MM/10 Second, In / Out Port : 1/2” SAI O-ring

Wire Line Hydraulic Motor Jacro 240 5(RH 2/2) S Series 103-1032-010 By. Eaton USA

  • Torsi Capacity : 452NMC (3961 lb/in),
    Speed Power : 0-250 Rpm, In/Out port : 1⁄2” SAI O-ring

Winch Hydraulic Motor Jacro 240 5(RH 2/2) 2000 Series 104-1228-006 By. Eaton USA

  • Torsi Capacity : 452NMC (3961 lb/in).
    Speed Power : 0-250 Rpm, In/Out port : 1⁄2” SAI O-ring

Cylinder Sleding Gearbox Jacro 240 (RH 2/2) Ø 40 x 50 x 25 Stroke 250 mm

  • Torsi Capacity : 542 NMC (5675 lb/in),
    Speed Power : 0-500Meter/ 1.5 Second, In/Out port : 5/8” SAI O-ring

Hydraulic Clamp Chuck AssyJacro 240 (RH 2/2) Ø 40 x 50 x 25 Stroke 70 mm

  • Torsi Capacity : 300 NMC (5675 lb/in),
  • Speed Power : 0-1 Meter/ 1.5 Second,
  • In/Out port : 1⁄2” SAI O-ring
  • Oil Cooler : 250 Ltr
  • Water Injection Pump :Yanmar TF 85 +
    Sanchin 120
  • Drill Pipe : 50 pipe (seemles) NQ3” /
    HQ3” @ 3 meter
  • Drill Bite :Wingbite / PCD
  • Water hose : hose polypipe
  • Core barel :Assy NQ / HQ